Pancake Load Cell Products

Screen universal, compression, sealed, flange and fatigue configurations by force and loading interface. Keep the complete requirement for engineering review.

Request Quote / CAD ↗Compare MT-PLC families

Force direction → requested capacity → interface

Screen the family before specifying the fixture.

These ranges are project-review envelopes from the current catalog brief. A result identifies a family for engineering review; a released capacity, thread or installation is confirmed on the project drawing.

5 review candidates. Loading interfaces remain subject to drawing review.

MT-PLC-12

Universal tension & compression

Outer mounting flange + central threaded hub

1–500 kN
Approximately 225–112,404 lbf

Bidirectional force points, thread engagement and fixture stiffness

Request this configuration ↗Review MT-PLC-12 details

MT-PLC-1201

1201-style compression

Outer mounting flange + spherical compression contact

2–1,800 kN
Approximately 450–404,656 lbf

Contact radius, platen hardness, overload peaks and assembled height

Request this configuration ↗Review MT-PLC-1201 details

MT-PLC-3201

3201-style stainless steel

Stainless radial-web body + sealed cable/connector assembly

2.5–1,000 kN
Approximately 562–224,809 lbf

Media, seal conditions, cable exit and complete-assembly evidence

Request this configuration ↗Review MT-PLC-3201 details

MT-PLC-FLG

Flange-to-flange

Inner and outer bolted flange interfaces

0.5–200 kN
Approximately 112–44,962 lbf

Both bolt circles, locating pilots, fastener access and axial stiffness

Request this configuration ↗Review MT-PLC-FLG details

MT-PLC-FAT

Fatigue & dual bridge

Radial-web load path with optional independent bridges

1.25–2,000 kN
Approximately 281–449,618 lbf

Mean force, alternating amplitude, frequency, cycles and two acquisition chains

Request this configuration ↗Review MT-PLC-FAT details

Download family selection workbook (PDF) ↓Download interface review sheet (CSV) ↓

Engineering intake

Bring the load path.
We’ll review the fit.

Send your capacity, center thread and mounting envelope. Include the full original part number when replacing an installed sensor.

Request a dimensioned drawing, capacity-specific calibration plan and itemized hardware quotation before freezing the fixture.

inquiry@pancakeloadcells.com

CAD and test reports are supplied for the agreed configuration. No generic drawing is presented as an approved production part.

Request Type

MT-PLC Family

Full Name *

Work Email *

Original Manufacturer / Full Model

Sensor Serial Number (if available)

Loading Mode *

Target Capacity *

Signal / Acquisition

Center Thread & Outer Diameter Preference *

Include center-thread engagement, the base/button stack and flange pilots. Original-model dimensions and proposed MT-PLC dimensions are reviewed separately.

Quantity *

Project Timeline *

Required Hardware & Signal OptionsPrecision Ground Mating Mounting Base (+$85–$180)Thread-in Hardened Spherical Load Button (+$45)Dual Redundant Wheatstone Bridge (+$120)Pre-Calibrated USB / 0-10V / 4-20mA / EtherCAT Amplifier (+$150)

Budget increments only. Engineering checks the selected sensor, integral/replaceable button, thread, amplifier protocol and calibration scope before quoting the assembly.

Application, duty cycle & requested documents

Compact models (1–25 kN): DHL Express parcel quotation with destination-specific transit estimates. Intermediate models (over 25 to under 50 kN): shipping assessed by packed mass. Heavy-capacity models (50–2,000 kN), including base assemblies: itemized DHL/FedEx heavy air freight on the formal Proforma Invoice. Availability, dispatch, customs and final freight are confirmed for the actual assembly and destination.

Your details are used to answer this request. Read the privacy notice.

Send the same engineering brief by email.

The email and copy actions include the values and options currently entered above. Keep this brief if your email app does not open.

Open complete email brief ↗

View / select the complete brief

Complete engineering brief

Name: Not specified
Work Email: Not specified
Request Type: Engineering quotation
MT-PLC Family: Engineering selection requested
Original Manufacturer / Model: Not specified
Serial Number: Not specified
Loading Mode: Tension & Compression Universal [1210 Style]
Target Capacity: 
Center Thread / OD / Replacement Model: 
Required Hardware: Sensor only
Signal / Acquisition: mV/V bridge output
Quantity: 
Project Timeline: 
Project Notes: 
Source Page: /products

Online submission and live brief updates require JavaScript. The email action above contains the prefilled request. Email any additional requirements to inquiry@pancakeloadcells.com.

Project inbox: inquiry@pancakeloadcells.com.